Màquina de baixa pressió de poliuretà de 3 components, màquina d'escuma i vessament

màquina d'injecció d'esponja

Detalls ràpids


Sistema de màquina: abocament, dosificació, barreja i colat

Sistema Mateirals Típic: TDI + MOCA / MDI + MOCA / Prepolímer + MOCA / E-300

Aplicacions: barres de plàstic, làmines de plàstic, corrons de plom, peces de plàstic per a la indústria, etc.

Descripció detallada del producte


Màquina de colat elastòmer de 2 components de la sèrie EA, màquina de dosificació, màquina de mescla

1. Resum:

La nostra màquina d'injecció de buit de pols és que la nostra empresa segueix els productes tecnològics avançats internacionals, importa les principals peces de màquines de països estrangers i marques famoses. Per tant, el rendiment tècnic i de seguretat de l'equip ha assolit el nivell avançat del mateix producte del mateix període a l'estranger.

Aquesta màquina s'utilitza per a la producció de productes d'elastòmers de poliuretà de fosa que utilitzen MOCA i altres materials com a extensor de cadena, com el corró d'encolatge, el coixinet, els corrons per a l'ús de l'elevador i els productes altament rígids i poden compondre el poliment predolímer i el buidatge de buit en aquesta màquina.

Es poden canviar diferents cautxús de PU instantàniament per produir CPU de diferents materials.

2. Paràmetres i descripcions principals de l'equip

2.1 Tipus: MAQUINA DE CASTING PU AMB MULTI COMPONENT (opció)

2.2 Sistema d'escuma adequat: productes de elastòmers Pu

2.3. Viscocity (cps):

A (POLIOL o pre-polímer): ~ 4000mpa.s (45 ℃ -100 ℃)

B (MOCA): 10 ~ 1000 mpa.s (130 ℃)

2.4 Sortida de sortida: 2-10 kg / min (100: 14), 5 escales totals per opcions

Rang de la barreja de rang ajustable: 100: 6 ~ 100: 20 Hi ha diferències de pes quan la densitat de la matèria primera i la relació de mescla de la matèria primera són diferents.

Opció: es pot afegir un altre component per al consum de pigments o agents.

3. Descripció tčcnica:

3.1 Tancs (A, B, Tanc)

Material del tanc: acer inoxidable AISI 304

Amb jaqueta de calefacció

Capacitat màxima: A220L B60L

Capacitat útil: A160L, B45L

Sistema de calefacció: recirculació de petroli

Comprovació de temperatura: sensor PT100.

Temp. Màxima: 130 ℃

Tolerància sobre la presa de temperatura: dins de +/- 1.5 ° C

Mesclador: material d'acer inoxidable tipus àncora

Velocitat de mescla: ajustada segons diferents matèries primeres

Finestra d'inspecció: finestra de vidre al cos del tanc

 

Opció: inductor elèctric

Sistema auxiliar:

Sistema de buit

Sistema de farciment de nitrogen

Mesurador de buit

Sistema d'ompliment de matèria primera

Sistema d'absorció de buit de matèries primeres

Sistema de descàrrega de matèria primera


3.2 Pipe

Material: PTFE reinforced stainless steel with mesh

Heating system: OIL heating

Max working pressure: 20 bar
Temp. Màxima: 130 ℃

Tolerance on the temperature holding: Within +/- 1°

These high flexibility insulation pipe can ensure the consistency of temperature in the whole pipeline.

3.3Metering system(A,B, components)

Metering pump: Gear pump from German

Delivery capacity of Metering pump: A 40cc/r, B 6cc/r

Filters: Highly filtering surface Stainless steel 304.

Motor:Converter in accordance with tachometer and motor to control the flow speed.

ALL the metering system and fliters keep under the tank and within the heating

The measurement system and filter in ovens, insulation material below. This design method can be pressurized tank in the wrong circumstances, to maintai

3.4 Mixing head

Material: High strength alloy

Speed: 0.0 to 6500 rpm.
Heating: Independent electrical heating Mixing by mixed-head match with the motor

Temperature check: Thermal sensor.

Tolerance on the temperature maintenance: +/- 1°C

Motor: Electric motors, controlled by a frequency convertor.

Our uniquely mixing head design has the following features: It can guarantee the accuracy of speed, and at a very low speed of the mixed quality of raw materials; so that the prepolymer does not cause pressure damage to properties.

Made of special alloy mechanical seal system made the mixing head also could work in the high anti-pressure, while ensuring the reliability of mixed system.

Unique design of the mixing chamber can be cleaned to ensure easy-to-use and thoroughness.

3.4.1 Injectors for A,B,

Material: high strength alloy

Injection system: injection pressure independent of each other

The heating system: independent electrical heating

Temperature measurement system: PT100 thermal sensor

Temperature error: control +/- 1°C

Each injection pressure control is independent of each other, can be adjust alone pressure casting and recycling pressure. The loop injection pressure will be tested by the head of sensor, and with pressure adjusting device. This control method can avoid every time before pouring out some materials must be mixed and the uneven.

4.Option: Auxiliary Metering and injection system: for color, foaming agent and additive agent and so on

Pump: Gear Pump

Metering accuracy: 0.3%.

Flow range: 0.006-0.06L/min

Metering accuracy : 0.3%.

Pressure check: Pressure transducer.

Tank capacity: 0.6L/2L

Motor: Electric managed by an inverter.

Injectors: Single for each auxiliary with independently adjustable injection pressure.

4. Cleaning system

Tank:20L Stainless steel

Control of Liquid :Visual glass window

Low position warning electronic equipment (OPTION)

Injector: Inject raw material to mixing head directly

The running speed and circulation of cleaning solution,air,mixing head are are independent control system,this can make them aximum cleaning effect.

In order to the maximize reduce consumption of cleaning, settings of each component can be pre-cleaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC

leaning procedures. The casting machine Settings when suddenly loses power in the artificial emergency cleaning device. Cleaning solution should use non-flammable solvents, such as:DBEMC.

5. 3-component Polyurethane Low pressure machine,Foaming and pouring machineElectric Board and software

Electronic display design according to the EC criteria.

Software: The software system can control the machine to work and in the standby machine control.

Data in the user interface through the following procedures:

* Working state real After all the machine on real-time parameters can be displayed on the interface, such as temperature, pressure, pumping and mixing speed, security levels, alarm conditions and other procedures set by the parameters must be displayed.

* Formula design program

The major setting and save the formula interface ( depth, temperature, pressure, etc). For each formula can be set and save 20 subroutine, these subroutines can cast the first one near the selector out directly.

* Calibration interface

This interface is mainly used to automatically correct out of three different charge, by a balancer to determine quality.

The software also include some other systems, such as casting machine maintenance control, work time, data statistics and alarm records. Computer softw

6.Machine Size

Height: 1,600mm

Length: 2000mm

Width: 2,200mm

Length of injection handle: 1,300mm

Weight: 1,500kgs

7.Installation terms:

Vacuum pump: 40m3/h

Compressed air: Dry air 5/7 bars

Flow capacity: > 5 Nm3/hour

Power: 220V/380V – 50 Hz (3P+N+T)

Installation environment: No install in the workshop of any explosion